Factory-engineered prefabricated bathroom pods that cut on-site wet trades, compress your schedule by up to 60%, and ship flat-packed to hotels, student housing, and multi-family projects worldwide.
“Trusted by buyers from more than 190 countries since 1999.”
A traditional bathroom ties up waterproofers, tilers, plumbers, and supervisors for 2–3 weeks per unit — and every grout line is a future leak risk. Industry data shows prefabricated pods cut bathroom installation time by 60–85% and remove the bathroom entirely from your project's critical path. Our prefabricated shower pods are engineered to deliver exactly that advantage, at factory-direct pricing.
Our pods integrate a pre-sloped SMC (Sheet Molding Compound) or reinforced acrylic tray with the back wall panels at the factory. The water-management structure is sealed and pressure-checked before it ever leaves our floor — no membrane painting, no curing windows, no weather delays on site.
Depending on layout and site conditions, a commercial shower pod can be positioned, leveled, and connected within 4–8 working hours by a two-person crew, versus 10–15 working days for a comparable tiled wet room. For a 200-room hotel, that schedule compression can translate into months of earlier occupancy revenue.
Every pod is manufactured and checked against an approved specification sheet before shipment. You replace the unpredictable variables of on-site labor — rework rates, wet-trade coordination, weather — with a fixed unit cost and a documented QC record per batch.
Our flagship MODEL D series is a "plug-and-play" prefabricated shower enclosure system — pre-drilled, pre-fitted, and pre-plumbed for rapid deployment. Here is exactly what your money buys:
Every buyer has heard "high quality." Fewer suppliers show the test data. Here is ours — the same protocol documented in our in-house lab and third-party inspection reports.
| Test Item | Standard / Method | Acceptance Criteria | Frequency |
|---|---|---|---|
| Tempered glass fragmentation | EN12150-1 / ANSI Z97.1 | ≥40 particles in 50×50mm area, blunt granules | Per glass batch |
| Hardware corrosion | 72-hour neutral salt spray (NSS) | No red rust, no blistering on 304 SS / brass | Per hardware batch |
| Tray load & deflection | Static load test, center point | No cracking or permanent deformation | Per mold batch |
| Water-tightness | Factory flood + spray test on assembled pod | No leakage at joints after 30 min | Sampled per order |
| Packaging integrity | ISTA-style drop test (1 corner, 3 edges, 6 faces) | Glass intact, EPE buffer functional | Per packaging design |
Third-party pre-shipment inspection (SGS, Bureau Veritas, or your nominated agent) can be coordinated before container loading — we consider it part of a normal B2B order, not a special favor. Related reading: SGCC/CE certified shower glass, 72h salt spray testing, drop-test standards.
Standard configurations below. All dimensions, finishes, and fitting brands are customizable for project and OEM orders.
| Specification | MODEL D (Flagship) | Details |
|---|---|---|
| Overall sizes | 900×900 / 1000×800 / 1200×900 / 1500×900 mm | Custom sizes on request |
| Height | 2100–2250 mm | Adjustable to ceiling conditions |
| Glass | 8mm tempered (6mm optional) | EN12150 / ANSI Z97.1 / SGCC compliant |
| Frame | 6063-T5 anodized aluminum | Chrome, matte black, brushed nickel, gunmetal |
| Tray | SMC compression-molded, pre-sloped | Anti-slip texture; acrylic option |
| Wall panels | Mold-resistant composite | Faux marble / subway tile / matte solid |
| Hardware | 304 stainless steel + brass | 72h salt spray tested |
| Plumbing | Pre-drilled, pre-fitted | NPT or BSP threads; PEX/copper adaptable |
| Door type | Sliding / pivot | Soft-close rollers, durability cycle tested |
| Packaging | Flat-pack knock-down kit | EPE foam protection, drop-test verified |
| Container loading | Project-optimized stacking | Maximized 40HQ loading plan per order |
Different buyers need different levels of standardization. We run three supply programs so you only pay for the customization you actually need.
Pod quality fails at interfaces — glass to frame, tray to wall, valve to pipe. Our QC chain is built around exactly those interfaces:
Glass thickness and temper certification verified per batch; aluminum profile wall thickness and anodizing checked against spec; hardware sampled for salt spray testing.
Tray slope and drainage verified after molding; frame cutting tolerance held to ±0.5mm; pre-drilled plumbing positions checked against the approved drawing — never guessed on the line.
Sampled pods fully assembled in our test bay for fit, door operation cycle, and water-tightness before batch release.
Accessories counted against the order BOM; labels coded by room/floor for project deliveries so installers grab the right kit for the right room.
Third-party inspection welcomed; container loading plans photographed and shared with the buyer before seal.
Whether you are a distributor adding bathroom pods for sale to your catalog or a brand building a private-label range, the engagement follows a fixed six-step path:
Share your floor plans and target market. We confirm plumbing code (NPT/BSP), electrical pre-wiring options, and dimensional fit within 3 working days.
One production-grade sample built to your approved spec — 7–10 working days for standard configurations.
Glass thickness, frame finish, panel pattern, and fitting brands locked in a signed specification sheet.
Scheduled production with in-process checkpoints and batch traceability.
Water-tightness sampling, hardware test reports, and your nominated third-party inspection before loading.
Shipments phased to match your construction sequence — pods arrive when the floors are ready, not before.
Market signal: the prefabricated bathroom pods market is projected to grow from USD 6.1 billion in 2025 to USD 14.9 billion by 2035 (9.4% CAGR), driven by hotels, student housing, and healthcare construction. Buyers who lock in a qualified pod supply chain now are positioned ahead of that demand curve.
We do not publish client names without permission — but we can tell you what the projects looked like and what was delivered.
Shower enclosure and screen systems supplied to a multi-unit residential builder, with tempered glass documentation (SGCC/EN12150) prepared for local compliance review and room-coded packaging to speed floor-by-floor installation.
View the Australia case
Shower door and enclosure program for a hospitality buyer, with hardware finishes matched to the brand standard and 72-hour salt spray reports included in the compliance file.
View the Canada case
Container-optimized flat-pack shipment with loading plans shared pre-seal, cutting per-unit freight cost for the distributor.
View the Tanzania caseAsk us for the reference project closest to your region and building type — we will share the relevant spec pack and test documentation under NDA.
Eight questions project teams ask before specifying modular shower pods — covering ROI, schedule, plumbing codes, site tolerance, freight, inspection, MOQ, and OEM branding.
For DevelopersRepetitive, large-scale layouts: student housing, multi-family apartments, hospitals, budget-to-midscale hotels, and workforce accommodation. Industry data shows pods cut bathroom installation time by 60–85%; a 200-room hotel finishing even two months early can recover far more than the typical 8–15% upfront premium over stick-built.
For DevelopersBathrooms come off the critical path. While your structure goes up, pods are built in our factory in parallel; installation compresses to hours per unit instead of weeks. Earlier completion means earlier occupancy revenue and lower financing carry.
For Contractors & InstallersYes. We pre-drill and pre-fit pods to your regional codes — NPT threads for North America, BSP for Europe/UK/Middle East. Internal water lines are pressure-tested at the factory, and every order includes exploded-view drawings plus an installation video for your crew.
For Contractors & InstallersOur 6063-T5 aluminum wall-adjustment channels absorb ±15mm of deviation. For anything beyond that, send us site measurements during the layout review step and we adjust the panel cutting plan before production — not on your site.
For Distributors & ImportersFlat-pack knock-down kits. Trays, back panels, and glass enclosures stack efficiently to maximize 40HQ loading; we share the loading plan and per-unit freight math with your quote. Packaging passes ISTA-style drop tests (1 corner, 3 edges, 6 faces) with EPE buffer protection around all glass.
For Distributors & ImportersAbsolutely — SGS, Bureau Veritas, or your nominated agent, coordinated before container loading. Batch test reports (glass fragmentation, 72h salt spray, water-tightness sampling) are part of the standard documentation pack.
For RetailersStandard Line starts from 10 units with 3 standard finishes, and samples ship in 7–10 working days. Many retail partners start with one mixed 20GP container to validate sell-through before committing to a private-label run.
For OEM Brand OwnersYes — the OEM Line covers custom sizes, finishes, buyer-specified fitting brands, branded packaging, and a full compliance file (SGCC/CE/EN12150 documentation, salt spray and water-tightness reports) under your brand name.
Send us your floor plans, target market, and approximate unit count. Within 3 working days you will receive a layout review, a configuration recommendation, and a landed-cost estimate with container loading plan.
No.1 Kexue Road, Zone B, Shishan Industrial Park, Nanhai, Foshan, Guangdong, China
