China shower door manufacturer for projects, wholesale, and OEM support.
KJbath
Factory-direct shower door and bathroom project support.
Shower screens engineered for the whole journey — 8mm/10mm EN12150-1 tempered glass, ISTA drop-tested packaging that survives courier networks, and hardware salt-spray tested for 96 hours. Lower breakage. Higher margin. Fewer callbacks.
“Their zone-packaging saved our contractors days of sorting on-site.” — Ethan, Project Developer
Selling glass online is risky — unless you partner with the right factory. Industry data puts the spontaneous breakage rate of tempered shower glass at roughly 0.3%, and most avoidable losses happen not in the bathroom but in transit. As a manufacturer of custom shower screens, we have engineered our supply chain around the three numbers that decide your profit: breakage rate, compliance, and MOQ.
No more anxiety over courier handling. Every panel is secured in honeycomb-reinforced cartons with high-density EPS edge protectors and custom-molded foam, validated by 1.5-meter drop tests on corners, edges and faces following ISTA parcel-delivery logic. Your frameless shower screens arrive intact — and your review score stays intact too.
Learn About Our Drop Test StandardsWe temper every panel at approximately 600°C and quench it to reach 4-5x the bending strength of float glass. Fragmentation is verified against EN12150-1 with a minimum of 40 particles per 50x50mm, and our heat-soak-informed QC keeps spontaneous breakage below 0.3%. Documentation for CE, SGCC / ANSI Z97.1 and AS/NZS 2208 can be prepared for applicable markets. Optional Easy-Clean nano-coating available.
Request Glass SpecificationsTest the market without tying up cash flow. Standard MOQ starts at just 10-20 sets per model, and you can mix sizes, glass options and finishes in one 20ft container — ideal for Amazon trial orders and regional distributors building their first assortment.
Any factory can say “high quality.” Few can show you the tolerances. Here is exactly how our shower screens are built, from raw float glass to the finished panel.
Need a different size, radius corner or drilled hole pattern? All parameters below are customizable through our drawing-review workflow.
| Parameter | Specification |
|---|---|
| Glass thickness | 6mm / 8mm / 10mm / 12mm tempered (8mm & 10mm standard for frameless) |
| Glass standards | CE EN12150-1, SGCC / ANSI Z97.1, AS/NZS 2208, CCC GB15763.2 |
| Fragmentation | ≥40 particles per 50x50mm (EN12150-1) |
| Spontaneous breakage rate | < 0.3% |
| Size tolerance | ±0.5mm panel; water-jet cutouts 0/+1mm |
| Max panel size | Up to 2440 x 3660mm (project-dependent) |
| Edge work | Flat polished, ~1mm chamfer, safety corners |
| Hardware | 304 stainless steel (316 optional); Chrome / Matte Black / Brushed Gold / Brushed Nickel / Gunmetal |
| Salt-spray resistance | Up to 96h, ISO 9227 neutral salt spray, no corrosion |
| Sealing | PVC water-seal strips, magnetic seals, silicone gaskets |
| Coating options | Easy-Clean hydrophobic nano-coating, safety film |
| Packaging | Honeycomb carton + EPS edge protection (e-commerce) / plywood crate (project) |
| MOQ | 10-20 sets per model; mixed loading in 20ft/40ft container |
| Lead time | 15-25 days standard; 25-35 days custom with holes/cutouts |
From industrial chic to modern luxury, our shower screens matrix is designed to fly off your shelves — and each series targets a different buyer segment and price point.
| JL712 Ultra-Minimalist (Frameless) | JP0206 Industrial Grid | Semi-Frameless Series | |
|---|---|---|---|
| Glass | 8mm / 10mm tempered | 6mm / 8mm tempered | 5mm / 6mm tempered |
| Hardware | 304 SS clamps & support bar | Matte black 304 SS framed grid | Aluminum alloy profiles |
| Look | Fully frameless, maximum transparency | Bold black grid lines, industrial chic | Slim frame, budget-friendly |
| Best for | Boutique hotels, modern apartments, premium e-commerce | Trend-focused brands, loft & hospitality projects | Budget hotels, large apartment programs, DIY retail |
| Install difficulty | Medium (needs plumb walls) | Medium | Low (frame forgives wall imperfections) |
| Price position | Premium | Mid-premium | Value |
Completely frameless fixed walk in shower screen panels — the ultimate best-seller for modern apartment renovations and contemporary retail.
Bold matte black profiles; a high-demand aesthetic for boutique hotels and trend-focused e-commerce brands.
Slim-frame, budget-friendly panels for large apartment programs and DIY retail. Custom finishes: Polished Chrome, Matte Black and Brushed Gold hardware, all 96-hour salt-spray tested.
Quality control here is a workflow you can audit, not a slogan. Every shower screen order passes five documented checkpoints:
Raw float glass from first-tier brands (Xinyi, CSG, Jinjing class) is checked for flatness, nickel-sulfide inclusions and surface defects before cutting; hardware lots are verified against finish samples.
CNC cutting, edge polishing and drilling are measured against approved drawings — ±0.5mm panel tolerance and 0/+1mm cutout tolerance are recorded, not assumed.
Fragmentation tests confirm ≥40 particles per 50x50mm (EN12150-1); surface stress and bow (≤1.5‰) are sampled per batch to hold the spontaneous breakage rate below 0.3%.
Glass, hardware kits, seals and instructions are dry-matched per order so nothing is missing when the carton opens on site.
Drop-test-validated packaging, label verification, and container loading photos sent to the buyer before departure. Third-party inspection (SGS/TUV/BV) can be coordinated at your request.
Whether you are building a private-label line or specifying 300 bathrooms for an apartment tower, the workflow is the same: clear drawings, approved samples, controlled production.
Buyers trust numbers; specifiers trust references. Two recent programs that show what the workflow above delivers:
A multi-storey beachfront development needed hardware that would survive salt-laden air. We supplied 304 stainless steel systems with surface treatment verified by salt-spray testing, paired with Smart Zone Packaging labeled floor by floor. The local contractor reported zero missing-part delays, and the anti-corrosion finish remains stable in the coastal climate.
“Their zone-packaging saved our contractors days of sorting on-site.” Ethan, Project DeveloperRead the Australia Case Study
An Amazon-category seller switched to our ISTA-validated e-commerce packaging (honeycomb carton + molded EPS) for their walk in shower screen line, with mixed-SKU container loading and 10-20 set trial MOQs. Result: transit breakage claims dropped below their 2% profitability threshold, and the line moved from quarterly trial orders to standing monthly replenishment.
For project buyers, labor is the hidden cost. Our screens are engineered to be installer-friendly:
Eight questions importers, developers and OEM brands ask before the first order — glass thickness, water containment, certifications, MOQ, private label, packaging, lead times and hardware durability.
For the Developer / Specifier6mm is reserved for framed panels, vanity screens and light-duty use; 8mm is the export standard for walk-in panels up to 2000mm high; 10mm is specified for floor-to-ceiling or oversized panels and five-star hotel suites where extra rigidity and a premium feel matter. 8mm accounts for the majority of our screen volume, with 10mm the fastest-growing spec in luxury projects.
For the Architect / DesignerA frameless screen is a splash barrier, not a sealed enclosure: it works together with a linear drain, correct floor fall and a 30-50mm glass-to-wall overlap. We add transparent PVC water-seal strips, magnetic seals and an optional bottom sweep or threshold deflector, which keeps the wet zone contained in typical residential and hotel layouts without a full frame.
For the Compliance-Focused ImporterCE-marked glass to EN 12150-1 for Europe, SGCC-certified glass meeting ANSI Z97.1 / CPSC 16 CFR 1201 for North America, and AS/NZS 2208 documentation for Australia and New Zealand. Fragmentation is verified at a minimum of 40 particles per 50x50mm and heat-soak-informed QC keeps spontaneous breakage below 0.3%; certificates and test reports ship with the order documentation pack.
For the ImporterStandard MOQ is 10-20 sets per model. Sizes, glass textures (clear, ultra-clear low-iron, fluted, frosted) and hardware finishes can be mixed in a single 20ft container, so you test several price points without tying up cash flow.
For the OEM Brand OwnerYes — laser-etched or printed logos on glass and hardware, private-label cartons and manuals, and NDA-protected custom tooling. OEM programs start from the standard MOQ, with sample approval required before mass production.
For the E-commerce RetailerEvery panel ships in multi-layer honeycomb cardboard with high-density EPS edge protectors and custom foam molding, validated by 1.5-meter drop tests to ISTA parcel-delivery logic. Breakage through courier networks stays below 0.5%, and verified transit damage is replaced free in your next shipment.
For the Retail BuyerSamples ship in 7-12 days by express. Standard models leave the factory in 15-25 days after order confirmation; custom glass with drilled holes or cutouts needs 25-35 days including drawing approval, and loading photos are shared before the container closes.
For the Project DeveloperHinges, brackets and stabilizers are 304 stainless steel or brass with PVD finish, passing up to 96 hours of ISO 9227 neutral salt spray testing with no corrosion. For coastal projects we recommend the PVD hardware line proven on Australian seaside apartments.
Tell us your target market, channel and volume plan. We will reply within 24 hours with pricing, MOQ options and a packaging/spec sheet matched to your channel — e-commerce parcel, wholesale distribution, or project delivery.
No.1 Kexue Road, Zone B, Shishan Industrial Park, Nanhai, Foshan, Guangdong, China
